The Complete Jobsite Inspection Checklist

A thorough jobsite inspection covers multiple safety categories. Use this checklist as a starting point and adapt it to your site and trade.

Fall Protection

• Harnesses properly worn and anchored?
• Guardrails in place at elevated work areas?
• Holes and openings covered or barricaded?
• Lifelines and lanyards free of damage?

PPE (Personal Protective Equipment)

• Hard hats worn by all workers?
• Safety glasses or face shields where required?
• High-visibility vests in work zones?
• Hearing protection where noise exceeds limits?
• Gloves appropriate for the task?

Scaffolding

• Scaffold planking complete and secure?
• Guardrails and toe boards in place?
• Base plates and mud sills properly set?
• Access (ladder or stairs) safe and stable?

Electrical

• Cords and temporary power properly secured?
• GFCI protection where required?
• No exposed live parts?
• Clearance from overhead lines maintained?

Excavations

• Shoring or sloping as required by soil type?
• Spoil piles set back from edges?
• Utilities located and marked?

Ladders

• Ladders extend 3 feet above landing?
• Proper angle (4:1) and secure at top/bottom?
• No damaged rungs or rails?

Housekeeping

• Work area free of debris and tripping hazards?
• Materials stored safely?
• Walkways clear?

Fire Safety

• Fire extinguishers present and accessible?
• Flammable materials stored properly?
• Hot work permits where required?

Machine Guarding

• Guards in place on saws, grinders, and other equipment?
• Lockout/tagout procedures followed?

Track your inspections with jobsiteinspection.com — Pass/Fail/N/A for each item, photos, and corrective actions in one place.